Application for fully automatic machines with cleaning program

1. Always follow theinstructions manufacturer's
   

‍

Application for fully automatic machines with powder compartment

1. ‍Place the tablet in the powder compartment for the second type of coffee and place a cup under the coffee spout.
   
2. Press the ground coffee button and start the coffee brewing process.
   
3. Once about half a cup of water has passed through, switch off the appliance using the main switch for about 5 minutes to allow the solvent to take effect.
   
4. Then switch the machine back on to complete the cycle. Repeat this process at least 3 times. Afterwards, rinse the coffee parts with clean water.
   
5. Before using the appliance again, make two cups of coffee.
   
6. To clean the drip tray, place a tablet inside and fill the drip tray 2/3 full with hot water.
   
7. Leave the cleaning agent to work for about 30 minutes and then rinse the drip tray thoroughly.
   
8. Now there are no more coffee deposits in your appliance.
   

‍

Application for devices without a powder compartment

1. Place one tablet in a cup and fill it with hot water.
   
2. Remove the coffee parts and clean the filters and the spout with the solution.
   
3. It is best to use a sponge or a brush for this.
   
4. Allow the solution to work for at least five minutes and repeat the process at least three times.
   
5. Rinse the coffee parts thoroughly with clean water and reinsert them.
   
6. To clean the drip tray, place a tablet inside and fill the drip tray 2/3 full with hot water.
   
7. Let the cleaning agent work for about 30 minutes and rinse the drip tray thoroughly. Now there will be no more coffee residue in your appliance.
   

‍

Application for devices with filter holders


1. Always switch off the device and let it cool down before cleaning.
   
2. Otherwise there is a risk of scalding.
   
3. Unscrew the filter from the top of the coffee machine parts and place it in a bowl along with the filters from your filter holder.
   
4. Place a tablet inside and fill it with warm water.
   
5. Leave the solution to work for about 30 minutes and rinse the filters with clean water.
   
6. There are no more coffee residues in the filters. Screw the coffee machine filter back on.
   
7. Before you put the device back into operation, prepare a cup of coffee and discard it.
   

‍‍‍

Suitable for use in thermos flasks and coffee pots.

1. Place one tablet in the thermos or coffee pot, fill 2/3 with warm water.
   
2. Leave on for about 30 minutes.
   
3. Then rinse carefully.
   

‍

‍